D-Link DI-614+ factory default reflash procedure
The DI-614+ has a tiny flash program saved in the boot sector of the flash that cannot be overwritten. You can restore your flash by doing the following:
- Get an original firmware from the D-Link website
- Power off the router
- Give your computer the static IP address 192.168.0.100 (*)
- Push and hold the reset button down with a paper clip or something similar
- While holding the reset button down plug the router back in and keep holding the reset button down for 10 seconds
- Open a browser and go to http://192.168.0.1
You should see a simple web page with an edit box, a browse button and a send button. Use this to flash your router with the D-Link firmware and all should be well again.
(*) It might be necessary to remove all other settings (gateway, DNS, …).
http://www.kaibader.de/projekte/dlink/
